3M 38590 - 3.78 L Installation Gel for Painting Protective Film Installation (PPF)

Product description

The installation gel 3M 38590 (1 gallon - 3.78 l) is a ready-to-use solution for the installation of the paint protection film (PPF), including Scotchgard. Its thick texture offers a controlled glide, facilitates repositioning on horizontal and vertical surfaces, while limiting air inclusions and edge uprisings - for quick, clean and pro pose.

Technical characteristics

• Capacity: 1 gallon (3.78 liters)
• Viscosity: ≈ 4500 cp (Brookfield, Spindle # 5 @ 10 RPM, 22 ° C)
• Ph: 6.5 (slightly acid, close to neutral)
• Color: Transparent
• Odor: Light smell of alcohol
• Weight: about 1 g / ml (≈ 8.3 lb / gallon)
• PRO Format: Unit Bidon (4 by Carton Possible)
• Ready for use, no mixture to do

Benefits for the applicator

• Less stress: controlled glide avoids raising the film to rehenumidify - time saving and precision
• Key on vertical surfaces effective thanks to the high viscosity
• Useful drying retardant in hot or large parts - prolonged pose without premature drying
• Less bubbles and edges of edges - net result
• Pre-blend: always even consistency, no human error, increased productivity

Simplified manual

1. Generously apply the gel on the installation surface and on the adhesive face of the PPF film (Scotchgard type or other compatible)
2. Remove the film on the wet surface, position without precipitation.
3. Slide the squeegee (with gel on the surface of the film) by overlapping each passage of about 50% to hunt the bubbles
4. Wash with clear water to eliminate any gel residue; never let the gel dry
5. Inspect the edges and cuts, rinse again if necessary.

Precautions for use

• Use reserved for professionals or trained users (industrial / occupational product)
• Consult FDS / SDS for security, ventilation, protective clothing, etc.
• Store at room temperature (+22 ° C recommended), protected from light, in the original container - maximum life 2 years from the shipment
• Do not ingest, avoid prolonged contact with the skin or eyes - refer to the FDS.
• Do not apply on non-dry paint or unprepared surface.

FAQ - Frequently Asked Questions

Can we use this gel for other movies than 3M movies?

Yes, although formulated for 3M Scotchgard, it is compatible with most available PPFs.

Does the gel dry too fast in the summer?

No, its thick texture and retardant formula allows it to stay wet longer, even in hot environment.

Should we dilute before use?

No, it's a ready-to-use formula - no mix, no risk of variation.

What if dry gel under the film?

Rinse immediately with clear water; Never allow to dry. If necessary, retreating the area and scrape again quickly.