Velcro disc 3M TRIZACT Ø150 mm P5000 - ultra fine polishing finish 30662

A homogeneous finish thanks to 3M TRIZACT technology

The Abrasive disc 3M TRIZACT P5000 Ø150 mm Use a 3M patented micro-repetitive structure, ensuring constant and controlled abrasion throughout the work. Each abrasive grain is uniformly distributed, which makes it possible to obtain a smooth and traceless result, ideal before the application of a polish finish.

Comfort of use and compatibility

Thanks to his Hookit system (Velcro), the 3M TRIZACT disc fixes quickly on the Ø150 mm trays of the Orbital sanders. It is compatible with many machines such as the RH353A Rupes or equivalent models of the market.

Ideal for fine correction stages

Grain P5000 is designed to smooth varnished or painted surfaces after a more aggressive sanding phase (P3000, P4000). It significantly reduces the subsequent polishing time and facilitates the achievement of a shiny mirror with a finishing lustrous.

TIPS OF USE

• Use at moderate speed on a low orbit orbit sand sander with integrated suction if possible.
• Work on a clean and decontaminated surface (see category Automotive decontamination).
• Clean the disc regularly to prolong its life.
• Finish with a fine polish for a perfect result.

Advantages of the 3M TRIZACT P5000 disc

• Ultra fine finish before polishing.
• Regular wear for homogeneous rendering.
• Hookit fixing (Velcro) fast and practical.
• Reduction of final correction time.
• Quality and reliability of the brand 3m.

FAQ

Can the 3M TRIZACT P5000 disc be used to dryness?

It is recommended to use it with a slight fog of water to improve the slide and limit the fouling of the disc.

How long does a TRIZACT P5000 disc last?

The duration depends on the pressure and the surface worked, but thanks to TRIZACT technology, the performance remains constant until the complete wear of the support.

Can we use it on other materials than automotive paint?

Yes, it can also be used on plastic surfaces, hard or composite varnish, provided you adapt the speed and pressure.

To go forward

Associate this disk to a orbital sander with low orbit (2.5 or 3 mm) as the Rupes Rh353a or a polish finish to maximize the final result.