- Reduced price
- Pack
Reference: 075040
Brand: Indasa
Reference: RF751500
Brand: Indasa
Reference: 3M50413
Brand: 3M France - Marine Auto
Reference: FE180
Brand: Indasa
Reference: FE2500
Brand: Indasa
(to be changed in the "Reinsurance" module)
(to be changed in the "Reinsurance" module)
(to be changed in the "Reinsurance" module)
This pack brings together selected items to provide total synergy during the process of correction and finishing of automotive paint. The combination of a large orbital rack with fine profile pads and high precision abrasives guarantees effective work while limiting the rise in the varnish.
This kit is designed to meet the needs of several profiles:
This kit can be used on all the painted and varnished elements of the bodywork:
To succeed perfectly your renovation, we recommend that you use a ferrous decontaminant as well as a decontamination gum before the polishing step. After the finishing phase, apply a iPA degreasing to check the correction, then protect your work with a body protection adapted.
Before any polishing work, the vehicle must be perfectly washed, mechanically decontaminated and chemically and then dried. Hide raw plastics and seals with a masking tape.
Secure the pad Monkey Line Skinny Red (Heavy Cut) or Apricot (Medium Cut) on the tray of the machine. Apply 3 to 4 drops of polish Menzerna HCC1000 on the pad. Stamp the product on a work area of about 40x40 cm. Spread the liquid at a slow speed on the T4200, then increase the speed. Make crosses (vertical and horizontal) by maintaining a light and uniform pressure. Immediately wipe the residues with the first microfiber.
Install the pad Monkey Line Skinny Yellow (Polishing) or Green (Finishing) on the lustrous. Deposit a few drops of polish Menzerna FF3000. Work on the same area by following the same cross-pass basis at high speed. This step eliminates the veil of potential Haze and brings a mirror finish. Wipe the remnants of product with the second clean microfiber.
Pro Tip: Use different color microfibers to separate your work steps. Book a color exclusively for control after the correction polish (HCC1000) and the other color only for the finish polish (FF3000) to avoid any bigger abrasive grain transfer on the final paint.
Warning: Never work on a hot bodywork or exposed directly to the sun. Be sure to regularly clean your foam pads using a suitable brush or compressed air during the work to prevent dried polish from powdering and creates new scratches.
Yes I do. Polishs Menzerna HCC1000 and FF3000 do not contain wax or silicone. They correct painting but do not lay down a durable protective layer. It is therefore strongly recommended to apply a synthetic wax, a carnauba wax or a ceramic treatment after the degreasing of the surface.
250 Ml bottles of Menzerna generally allow the correction and finish of 2 to 4 complete vehicles, depending on the size of the cars and the severity of the defects to be corrected.
Yes, pads Monkey Line Foam skinny can be cleaned with lukewarm water with specific pads for pads or neutral soap. Let them dry in the open air, face foam down, before a new use.
Reference: 137414 x 12
Brand: Intercash Professionnel
Reference: 615300374x10
Brand: Intercash Professionnel
Reference: BLM05010
Brand: BLACKMAMBA
Reference: GD23L
Brand: Santex
Reference: 9.HOLDER
Brand: Rupes
Reference: M16_EU
Brand: Liquid Elements
Reference: 9.Z1024
Brand: Rupes
Reference: Z78
Brand: Liquid Elements