Takeoff gum Car adhesives on drill 100 mm diameter

An effective solution for removing adhesive residues

This scrub drive, or "gum disk", is specially structured with slats to prevent excessive heating from the treated surface. Its specific rubber composition makes it possible to disintegrate the vinyl films, the monogrammes and the residues of adhesive ribbons by simple friction. Climbing on a standard drill, it offers productivity much greater than a manual withdrawal, while limiting the use of aggressive chemical solvents.

Technical specifications

• Product Type: Disc Gum of take-off (Folienradierer)
• Use: Mechanical removal of adhesives, stickers and glues
• Compatibility: Drill mounting or screwdriver (adapter included)
• Material: High density flexible rubber with slats
• Dimensions: Diameter 100 mm x Thickness 20 mm
• Color: Beige / yellow

For which user?

This product is for both Detailing Professional Wishing to save time on aesthetic preparation than particularly passionate wishing to deflect his vehicle or withdraw old advertising stickers. It is particularly recommended for the rehabilitation of fleets of commercial vehicles or used cars.

On which surfaces use this product?

• Bodywork: Painted and varnished surfaces of origin.
• Windows: Effective for stickers on rear window (avoid defrost filaments).
• Rims: To remove the remains of glue of the old balancing fillings.
• Metals: Naked or treated metal surfaces.

Why choose this rubber?

• Slot design: Reduces thermal friction and avoids burning varnish.
• Universal adapter: Compatible with all standard drill mandrels.
• Professional efficiency: Deletes the most stubborn residues without a significant physical effort.
• Time saving: Advantageously replaces manual scratch times.

In what cases use this product?

• Removal of logos and monograms Builders (dishesive).
• Deleting decorative bands or nets on sports cars.
• Cleaning glue residues after removing a complete covering.
• Boat maintenance (gelcoat) to remove names and registration numbers.
• Cleaning the sealing glue residues on the aluminum rims.

How to use this product for optimal result?

1. Preferably clean the area to prevent abrasive dust from scratching the varnish.
2. Mount the gum on your drill using the supplied adapter.
3. Set the speed of rotation (maximum 4000 rpm recommended by security, ideally between 1500 and 2500 rpm).
4. Work with light movements from left to right without exerting excessive pressure.
5. Once the adhesive removed, clean the gum residues with a body degreasing or a cleaner.
6. If necessary, perform a slight polishing with a polish finish to standardize the shine.

FAQ - Frequently Asked Questions

Can the eraser scratch my painting?

Used properly on a clean and healthy varnish, it does not scratch. However, it often leaves a slight sail of gum or a matte appearance that a mere passage of lustrant will disappear immediately.

What is the ideal speed of rotation?

It is advisable not to exceed 4000 rpm. A moderate speed allows better control and prevents overheating of the bodywork.

Is it effective on old stickers cooked by the sun?

Yes, that's exactly where she is most useful. It comes "nibble" the gangway matter that you could not take off by hand.