3M 80349 Small LIQUIDE EXTRA FIN - yellow - 250 ml

250 ml bottle

The 80349 extra fine polishing liquid has been developed specifically for the new anti-scratch varnishes, to give both a great cutting power and an ultra-brilliant finish.
This product can also be used on standard varnishes.
Used after the Trizact 50077 Polish Liquid, it quickly restores an exceptional shine that lasts over time.
It is recommended to use the 80349 with an electric or pneumatic chandelier, set to an average speed, equipped with a perfect-it 60107 honeycomb orange foam. The use of a very high-off orbital machine is an option that avoids possible holograms on very sensitive shades.

Key features
⇒ Great Cutting Power
⇒ Easy Wiping
⇒ Extra-fine finish and exceptional brilliance
⇒ Few projections
⇒ Packaged in 250 ml cans with new yellow anti-blocking cap for easy recognition
⇒ Ideal to complete a polishing operation with Trizact 3M 50077 polishing liquid

Application method
1. Shake the can of liquid to be polished before use.
2. Apply a small amount of extrafine polishing liquid to the foam 3M 50488 or directly on the surface. On larger areas, apply enough product to cover a 50cm x50cm square.
3. Spread the product evenly with the foam before starting the machine to avoid splashing
4. Start the machine (medium speed) and maintain a light pressure, avoiding staying in the same place so as not to cause the varnish to warm up.
5. Polish until the liquid begins to dry, then reduce the pressure applied to the machine by slightly increasing the speed of rotation.
6. Clean the worked surface with microfiber fabric.
7. Repeat on the rest of the panel in the polishing area.
8. At the end of the process, the surface can be protected with the ultimate protective liquid - red cap - Perfect-it 09377.
9. Clean the foam with water and allow to dry for later reuse

250 ml bottle