Rupes 980.720 PrecisionPro Tray for D-A Ø125mm - Ø5 "HLR15 and MK5

High precision design for body polishing

The polishing tray Rupes PrecisionPro Ø125mm (980.720 Ref.) Represents the technical evolution of random orbital polishers. Its structure incorporates a hot welded polyurethane interface directly to the self-gripping, eliminating any risk of delamination to thermal and mechanical stresses. Thanks to a rejected center of gravity and a rubber protective border, this tray offers a millimeter control during the painting correction phases, while reducing the user's fatigue with a carefully calibrated dynamic balancing.

Technical specifications

• Product Type: Auto-gripping polishing stand (backing pad)
• Use: Varnish correction, polishing and body finish
• Compatibility: Orbital polisher Rupes Bigfoot HLR15 Ibrid, Rupes BIGFOOT LHR15 MARK V and LHR125E.
• Material: High density polyurethane heat-blind with rubber protection edge
• Dimensions: Diameter 125 mm (5 inches)
• Color: Black and gray with protective contour
• Manufacturer Part Number: 980.720

For which user?

This tray is aimed at demanding detailing enthusiasts and professionals of automotive aesthetic renovation or bodywork. It is ideal for those looking for accurate guidance during intensive sessions corrections of defects or high gloss finish steps.

On which surfaces use this product?

The PrecisionPro 980.720 tray is used in combination with a polishing pad adapted to the following surfaces:

• Automobile varnish (tender, means, hard and anti-scratch)
• Live brilliant paintings
• Marine gelboats and resin or polyester elements

Why choose this product?

• Thermosouded assembly: Maximum durability and irreproachable holding of the self-gripping system.
• Center of gravity down: Increased stability and better pressure control exerted.
• Rubber safety edge: Protection against accidental contact with body edges.
• Dynamic balancing: Significant reduction of vibrations for more comfortable work.

To perform a complete correction work, combine this tray with a orbital polisher Rupes New Generation Compatible, use a polishing buffer Foam or wool, apply a correction compound adapted and wipe the residues with a finishing microfiber.

In what cases use this product?

• Replacing a used or damaged tray on Mark V-Mark V. Polisher.
• Targeted correction of micro-scratches and varnish defects on bodywork elements.
• Finishing polishing to eliminate holograms and maximize gloss.
• Renovation of gelcoat on boats and composite parts.

How to use this product for optimal result?

1. Make sure the polisher is turned off or battery removed before any intervention.
2. Climb the plateau 980.720 on the spindle of your polisher Rupes Compatible using the tool provided by the manufacturer.
3. Perfect your 130mm (5.5 ") polishing pad in the center of the self-gripping tray.
4. Apply your polishing product and work the area by crossed motion without exerting excessive pressure.
5. After use, blow the plate with compressed air or clean the self-gripping grip with a flexible brush.

Frequently Asked Questions (FAQ)

This tray is compatible with the polisher Rupes LHR15 Mark III?

No, reference 980.720 is designed exclusively for polishers Rupes BIGFOOT HLR15 IBRID (wireless) and LHR15 Mark V. For LHR15 Mark III, the plateau reference adapted to previous generations should be used.

What size of polishing buffers should you use with this tray?

This 125 mm (5-inch) diameter tray is ideally used with buffers (foam, microfiber or wool) with a self-gripping face of 130 mm (range Rupes D-to 130/150 mm).

Why is the self-gripping assembly thermosouded?

The hot vulcanization of the Velcro system directly on the polyurethane interface prevents the detachment of the fastening under the effect of heat and high speed rotations, ensuring a long time.