Résine Epoxy de Coulée Transparente pour Table Rivière Kit 1 kg - Jusqu’à 50 mm

 
 

Description:

The COULEE AND INCLUSION RESINE EPOXY is a transparent, non-juvenating epoxy resin with low viscosity and slow hardening.

Scope of application:
La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La La COULEE EPOXY AND INCLUSION is ideal for making fillings in furniture accessories or for the realization of casting objects in moulds, prepared with an appropriate demoulant agent.

Characteristics :

Composition resin - Epoxy polyetheramine
Solvent composition - Alcohols (traces)
Colour - Colourless, transparent
Brilliance degree at 60°C - ♣93 gloss
Dosage - By weight: 3 parts A, 1 part B
Lifetime in pot - 150 min. for 200g mixture (A+B) at 25°C
Application conditions - Ambient humidity: 50% maximum // Ambient temperature, support/painting: 18°C minimum
Polymerization/Seaching - At room temperature, by chemical reaction
Dilution - No need
Demolition time (50 mm thickness) - 48 h to 20°C // 24 h rest at room temperature + 12 h to 40°C
Heart Dry at 20°C - 48 h // Full drying after 15 days
Dry extract - 97% (volume) // 99% (by weight)
Density - 1.08 ±15 g/litre at 20°C
Brookfield viscosity - 200 cps (A+B) at 20°C 4/50 tpm
Theory yield - 11 kg/m2 to 10 mm thick
Flash point - ≥61°C
Preservation - 12 months minimum in its original unopened packaging, in a dry and fresh place.
Cleaning tools - Acétone
 

Implementation:

Mix the 2 components perfectly with a spatula, according to the dosage indicated, by scraping the walls and the bottom of the container.

 

Council:

to avoid mixing problems, you can pour this mixture into a new container and continue to mix for a minimum of 3 minutes. Let stand for a few minutes before pouring the product, so that the air incorporated during the mixture can escape.

to promote the moulding and removal of the microfoam, we recommend applying a layer of the mixture on the walls of the mould and on the items to be included before casting.

 

Since this product is formulated with low responsiveness, drying will be slow. However, it is possible to accelerate it by allowing drying to be done at a temperature of 40°C.

This low reactivity allows the flow of thicknesses greater than 50 mm, avoiding any incorporation of air and a strong thermal reaction.

 

This resin can be dyed with coloring paste for epoxy and/or inert additives (aluminum, photoluminescent or nacrease pigments) to create special effects.