Clay decontamination en Gant

Our clay decontamination products use advanced high-tech polymer technology to eliminate contamination from various surfaces without using chemicals with incredible results!

The use of this product prior to the application of a wax, polish or coating is highly recommended to obtain careful work.

1. The clay pad has 3 layers. One is biogel with clay (grey color), one is a sponge in the middle (yellow color), and the other is a velcro (black color).
2. During use, first moisten the pad, use the rubber side (grey color) to gently wipe the contamination until the surface is clean and smooth.
3. Can be used on all the paint of the vehicle, glass, chrome etc.
4. If applied by a chandelier, paste directly the velcro side on the machine.
5. Low speed is highly recommended to avoid burning paint.
6. If you drop it on the ground, you must inspect the Pad to remove any debris or contaminant that the Pad may have recovered.

Important:

Use a lubricant with your decontaminant.

The lubricant makes the surface slippery to reduce friction between the clay and the surface.

Frotter with clay only on the lubricated area and re-cool as needed. When used as indicated, the clay will eliminate the contamination of paint, glass and chrome without causing whirlpools or scratches.

ALCHIMY 7 Nett'Lux - 470 ml - Cleaner without rinsing and lubricant

Nett’Lux Alchimy has two functions:
Cleaner without rinsing and lubricant for decontamination gums.

- Used between washing, it removes dust, fingerprints and other dirt. Used at the end of a wash, it ensures a perfect finish without any trace. Easy and quick to use.

- Used with the decontamination gum (Step 3), it effectively lubricates the paint and leaves a soft finish.

Direction of employment :

Act bottle before use.

Used after washing or between 2 washings:

1. Spray on the area to be treated. Work by area.
2. Make the product evenly on the bodywork using a microfiber.
3. Wipe the surplus using the other side. The microfibre Double Face Alchimy and Kashmir V2 Alchimy are ideal.

 
Used with a decontamination gum:

1. Pulverize by small areas on the bodywork and perform straight movements by exerting low pressure on the gum.
2. Wipe the excess product with a microfiber. The microfibre Maxi EXTRA Alchimy is ideal.

Usage frequency:

Nett'Lux Alchimy can be used as often as necessary, after each washing, between two washings and during step 3 of Decontamination.

Uses:

Cars, Trucks, Motorcycles, Scooters, Camping Cars, Caravans, Boats, Offices, Houses

Tips and advice:

Work away from the sun and on a cold body.
At the end of a washing or between 2 washings:
Work by area (half of a hood, a wing, half the roof, ...)
Nett’Lux Alchimy keeps a perfect finish for the bodywork. Ideal for dusting and removing light dirt. Otherwise, make a washing with a Shampoing Alchimy.
At the end of a wash and after the drying of the body, it will restore a glossy finish without any trace.

With the decontamination gum:
Work by small surface (30 x 30 (cm)
Work on a clean bodywork, previously washed.
To optimize the final result and get an unmatched rendering, respect the recommended products and accessories. Refer to the decontamination guide.

Conditions of application: Apply to cold surfaces.

Conservation: Store away from solar radiation and at a temperature between 10°C and 30°C.