Das-6 PRO Decontamination Clay Hard 100 GR

DAS-6 PRO clay hard decontamination bar.

The decontamination clay DAS-6 PRO hard allows the removal of contaminants on the surface of the body (varnish, lacquer, glass).
Thanks to its special detailing formula, it limits defects due to application (marring).
You can treat different types of contaminant with our clay (bird droppings, paint trace, oxidation, tar, ...).

Why decontaminate your car before a correction?

Before polishing a vehicle, we will of course wash it.
If we are rigorous, we will do a pre-wash and then a manual wash with a neutral shampoo.
But have we removed all the contamination present on the vehicle?
Each wash will remove much of the dirt.
Problem. A big part? But not everything?
And no. The smallest dirt is always there, nesting in imperfections of the varnish. If you run your hand over your body, you feel it, at least you do not feel a smooth surface, but a very slight roughness, nothing important because it is not visible, but important enough to threaten our polishing.
Indeed, when we start our correction with our polisher, our pad with its polish will be in contact with its microparticles and with their strength will tear them from the bodywork. They will nestle inside the pad and will act on our correction by bringing their aggressiveness as dust and voila, we make holograms during our polishing.
We chose an orbital polisher to have as few defects as possible and yet we create some.

Nothing is lost, it is easy to remove this contamination.

How to use our DAS-6 PRO hard decontamination clay bar?

Plan a lubricant or make it yourself:) with 1 liter of demineralized water in which you will put 2 or 3 caps of your favorite shampoo.
Knead your clay in your hand to soften it and create a washer about 7 to 8 cm in diameter.
Spray your lubricant on your clay and on the surface to be treated (wear gloves).
Gently rub your clay on the surface. Lubricate regularly.