ALCHIMY7 Ceram'X 470 ML Fast Wax

Ceram'X Wax Alchimy7 is a very concentrated wax and ceramic preparation (Silice Si02).

It is used with a foam cannon( Venturi / Foam Lance), a pressure sprayer or a simple sprayer (STD sprayer).

Its formulation allows for use on both wet and dry bodywork. But above all its formulation is compatible with all types of water (soft, hard, even limestone).

Allows you to fully protect a vehicle (body, rims, windows, plastics, etc.).

Protects surfaces and brings shine, depth and hydrophobic effect.

Can be used as a QW fast wax (Quick Wax).

Perfect to easily and quickly protect your vehicle or to maintain/extend existing protection.

How to use it:

Shake the bottle before use.

With a Venturi (Foam Cannon):

1. Pour between 25 and 70 ml into the tank of the foam cannon. Add the water to the tank and then spray over the entire vehicle (just washed/rinsed vehicle). Leave on for 1 to 2 minutes.

2. Rinse the vehicle thoroughly and dry it for a perfect finish.

With a sprayer (pressure or simple trigger sprayer):

1. Dilute Ceram'X between 5 and 20 with water %. Mix well and spray over the entire vehicle. Leave on for 1 to 2 minutes.

2. Rinse the vehicle thoroughly and dry it for a perfect finish.

Quick Wax Use:

1. Dilute Ceram'X between 5 and 15 with water (ideally demineralized) between 5 and 15 %. Mix well and then spray panel by panel (on clean and dry vehicle). Apply evenly with a gentle microfiber.

2. Wipe with another microfiber to ensure a perfect finish.

Note:

Do not allow to dry. Always work on cold or cooled surfaces. A second application enhances protection and shine.Carefully dry the vehicle and dry it for a perfect finish.