Work Stuff Pad Finishing diam 125/140 mm Red

Finishing polishing pad with an open cell structure.

How do I use Work Stuff Pad Finishing?

It is used on a tray in diam 125 mm.
Position the pad by centering it on the board.
Place 2 to 3 hazelnuts of your polish on the pad. Without turning your machine, stamp the pad on the surface to be treated (usually 50 x 50 cm) to deposit the polish.
Start the polisher at slow speed to spread the polish and then increase the speed.

How to maintain the Work Stuff Pad Finishing pad?

After use, the pad contains polish residues. For conservation and future use it is important to maintain or clean your pad.
At the end of your polishing session, you can spray a universal APC cleaner. This will allow you to remove the largest, including polish residue. You can then (even later) do a cleaning with water and dishwashing liquid.

Do not use hot water that may damage the glue between the foam and the self-gripping support.