WATERPROOF GRAIN SHEET 180 A 1500Our waterproof abrasive sheets will allow you to make a wet sanding or polished glossy and thus take back paint defects, essentially an orange peel.
WATERPROOF SHEET GRAIN 2000 or 2500 - 1/2 SHEETOur waterproof abrasive sheets in 2000 or 2500 grain will allow you to make a wet sanding (wetsanding) and thus take back paint defects, essentially an orange peel.
The complete kit Rupes Bigfoot LHR75II / LUX brings together the LHR75II Mark II orbital orbital (75 mm plateau, 12 mm orbit) and all consumables and accessories for varnish correction and areas finish Discussed. Lightened at 1.8 kg with polysynthetic gears and a lowered center of gravity, the machine offers optimal control over curved surfaces. This turnkey cabinet includes coarse and D-a fine polishs, 4 pads (wool and foam), 3 microfibers, apron, cable clamp and Bigfoot transport bag.
A complete turnkey kit for polishing of the excess areas
Kit Rupes Bigfoot LHR75II / LUX combines the new generation wired orbital (LHR75II) with a complete selection of polish, pads, microfibers and transport accessories to effectively treat the difficult access areas: bumper, mirror hulls, door and bottom mounts. Compared to the old generation (LHR75E), the machine incorporates a shortened front head from 1 cm to lower the center of gravity, a reduced weight to 1.8 kg and polysynthetic composite gears that limit the vibrations and Noise.
12 Mm orbit and 75 mm tray adapted to localized correction and pronounced curves.
Polysynthetic gears reducing noise pollution and fatigue during prolonged construction sites.
Lowed center of gravity (- 1 cm in height) guaranteeing better stability without a rocking effect.
Electronic speed controller starting from 3,000 rpm for a mastered spread of polish.
Full lux box to cover the cutting steps (coarse), intermediate and finishing (fine.)
Technical specifications
Product Type: Wired electric orbital orbital bitch kit (Roto-orbital free movement)
Use: Varnish correction, intermediate polishing and finishing of complex and narrow areas
Material: Polysynthetic composite gears, polymer body and non-slip rubber inserts
Dimensions: Reduced head height of 1 cm compared to the LHR75E
Weight of the machine: 1.8 kg
Color: Black and gray
Manufacturer Part Number: LHR75II / LUX
Detailed content of the LHR75II / LUX KIT
1x Orbital LHR75II Mini Lustrous (Ref LHR75II)
1x Polish D-A coarse 250 ml (9.dacoarse250 Ref
1x Polish D-A Fine 250 ml (Ref 9.Dafine250)
1x Pad Wool D-A coarse Ø 80 mm (Ref 9.xw80h)
1x Pad Wool D-A Medium Ø 80 mm (Ref 9.NW80M)
1x Pad Foam D-A INTERMEDIATE Ø 80-100 mm (9.DA100B Ref
1x Pad Foam D-A FINE Ø 80-100 mm (Ref 9.DA100M)
1x blue microfiber (9.BF9050 Ref
1x yellow microfiber (9.BF9060 Ref)
1x white microfiber (9.BF9070 Ref)
1x Cable clamp / cable clamp (9.Z1024 Ref
1x Bigfoot Apron (9.Z868 Ref
1x Bigfoot Tools Bag transport bag (9.Z883 / BF REF
For which user ?
This complete box is for detailing professionals, coachbuilders and aesthetic preparators looking for a ready-to-use set and easy to transport intervention with the Bigfoot bag, as well as passionate individuals wishing to equip a complete kit for correcting and Finish the narrow areas of their vehicle.
On which surfaces use this product ?
Automotive body (varnished and brilliant paints direct)
Painted plastics and lacquered elements (piano black uprights)
Polycarbonate headlight optics (renovation after sanding)
Gelcoat Boat (narrow areas, back paintings, superstructures)
Windows (light polishing with pads and products dedicated to glass)
Why choose this kit ?
Complete kit for chain correction (pads wool + D-A coarse) and high gloss finish (foam pads + D-A fine)
Simple identification of wiping steps thanks to the 3 microfibers of separate colors (blue, yellow, white)
Notable Lightening of the Machine (1.8 kg) and lowered center of gravity facilitating work on vertical panels
Correction of micro-scratches and defects pronounced on bumper, curved wings and cash flow
Polishing of mirror hulls, gatebrokes and gate ups
Renovation of Ternies or Oxidized Lighthouse Optics
Removal localized defects after sanding with water (Wet Sanding)
Precision polishing on motorcycle body, motorhome or boat
How to use this product for optimal result ?
Wash, decontaminate (chemically and mechanically) and thoroughly dry the surface to be treated.
Select the PAD / polish torque adapted to the desired correction level (eg 9.XW80H or 9.NW80M wool with D-A coarse for marked faults, then 9.DA100B foam pad or 9.DA100M with D-A fine for finishing.)
Center the pad on the 75 mm Velcro tray and apply some polish hazelnuts.
Start the low speed machine (3000 rpm) to spread the polish without projections, then increase speed.
Work by crossed passes on a reduced surface by holding the flat plateau.
Wipe the residues with the microfibers supplied (dedicating a polish step color) and check the result under inspection lamp.
Professional trick
Use the color code of the 3 microfibres included (blue, yellow, white) to avoid any cross contamination: Book for example the blue microfiber with the wiping of the D-A coarse and the yellow or white with the wiping of the D-A fine so. No abrasive residue comes to create micro-scratches during the finishing phase.
Error to avoid
Never work by tilting the machine on the lanche of the pad at the vivid body edges: the pressure concentration may pierce the varnish and to damage the wool or foam pads prematurely.
FAQ
What is the difference between LHR75II STD and LHR75II / LUX ?
The machine and its technical characteristics (400 W, 12 mm orbit, 75 mm tray, 1.8 kg) are strictly identical. The STD version corresponds to the machine delivered alone with its tray, while the Lux version is a complete kit including the Polishs D-A coarse and D-a fine, 4 pads (wool and foam), 3 microfibers, an apron, a Cable clamp and Bigfoot transport bag.
The Rupes Is LHR75II a battery machine ?
Not. Despite the disappearance of the letter "E" in its reference (formerly LHR75E), the Rupes LHR75II remains a wired electricity gauge equipped with a 9 meter power cable.
Can we make a complete correction in two stages with the LHR75II / LUX kit ?
Yes I do. The Polishs (D-A Coarse and D-A Fine) and Pads (Coarse / Medium and Foam Foam Pads (COARSE / FOOD) allows you to perform both the cutting phase to eliminate marked defects and the Finishing phase To obtain a high level of gloss (gloss) before protection.
Semi-rigid and foldable bag in robust silver fabric to transport and protect your polishers and accessories Rupes Bigfoot. 8 internal compartments, external pocket, compatibility with all Bigfoot models.
The wired orbital lustrous Rupes BIGFOOT LHR75 MARK II STD is designed for varnish correction and polishing of different areas of the bodywork. Equipped with a 75 mm tray, a 12 mm orbit and polysynthetic gears, this lightened generation (1.8 kg) offers a lowered center of gravity for optimal control. Its electronic drive (3,000 to 5,500 rpm) ensures...
The complete kit Rupes Bigfoot LHR75II / LUX brings together the LHR75II Mark II orbital orbital (75 mm plateau, 12 mm orbit) and all consumables and accessories for varnish correction and areas finish Discussed. Lightened at 1.8 kg with polysynthetic gears and a lowered center of gravity, the machine offers optimal control over curved surfaces. This turnkey cabinet includes coarse and D-a fine polishs, 4 pads (wool and foam), 3 microfibers, apron, cable clamp and Bigfoot transport bag.