Mini 3M Perfect-It 3 polish + 3 pads 3M

3m 51816 Perfect-It Polishing fluid Fast Cut+ Extreme, 500 gr, 432 ml


The Mini Perfect-It kit includes 3M star products, namely the green cap 51816 in 500 gr, the yellow cap 80349 in 250 ml, the blue cap 50383 in 250 ml with their luster foam (50487, 50488, 50388).



3M polishing fluid Fast Cut Plus Extreme 51816 Perfect-It is a highly abrasive liquid that can be used for polishing auto and nautical paints to eliminate scratches generated during the paint sanding stages.

It can also be used to eliminate oxidation marks, scratches and defects left by the equipment of automatic cleaning stations, etc on paints.
It is easy to wipe and last longer than the old generation of green cap 50417 and 51052 Fast Cut Plus.

Improved treatment characteristics
• Reduce the use of products up to 30%
• Very easy to wipe
• Long working time
• Good finish
• Colourless, allowing the identification of remaining sanding stripes before passing to the next step
• Few splashes
• Can be used with or without water

Flacon of 500 gr, 432 ml


An easy to memorize method for an irreproachable result. A color, an operation.. The ease of spotting and memorization offered by the cap/cover color codes facilitates work. Indeed, each of the caps of the three products has a specific color (green, yellow, blue) that refers to a particular operation, respectively: polishing, lusting, removing holograms.



3M 80349 250 ml and a foam 3M 50488 in diameter 150 mm.



The extra fine polished liquid 80349 has been developed especially for new scratch-proof varnish, giving both a great cutting power and an ultra-gloss finish.

This product can also be used on standard varnishes.

Used after the Trizact 50077 polished liquid, it makes it possible to quickly restore an exceptional lasting shine in time.

It is recommended to use 80349 with an electric or pneumatic chandeliers, set on an average speed, equipped with a Perfect-it 60107 alveole orange foam. The use of a very high eccentration orbital machine is an option that avoids possible holograms on very sensitive hues.



Main features

⇒ Great cutting power

⇒ Easy wipe

⇒ Extrafine finish and exceptional shine

⇒ Few projection

⇒ Conditioned in 250 ml cans with new yellow anti-lock cap for easy recognition

⇒ Ideal to complete a polishing operation with Trizact 3M 50077 polishing liquid



Application method

1. Shake the liquid can before use.

2. Apply a small amount of extrafin polished liquid to 3M 50488 foam or directly to the surface. On larger areas, apply enough product to cover a square of 50cm x50cm.

3. Spread the product uniformly using foam before starting the machine to avoid projections

4. Start the machine (average speed) and maintain a light pressure avoiding staying in the same place to not cause varnish warming.

5. Polish until the liquid starts drying, then reduce the pressure applied on the machine by slightly increasing the speed of rotation.

6. Clean the surface worked with a microfiber fabric.

7. Start the operation on the remaining panel of the area to be polished.

8. At the end of the process, the surface can be protected with the ultimate protection liquid – red cap – Perfect-it 09377.

9. Clean the foam(s) with water and let dry for further reuse



3M 50383 250 ml and a foam 3M 50388 in diameter 150 mm.



Liquid Ultrafin Perfect-It-III Ultrafina SE



The Perfect-it IIITM Ultrafina SE 50383 liquid is an ultra-fine finish product designed to eliminate holograms and halos that may be present after chandeliers.



• Eliminates holograms and halos without using an orbital machine

• Applies with a blue alveole foam and a rotary chandelier

• Brings optimal shine on the most delicate hues

• Easy wipe

This chandeling fluid is to be applied with the Blue Alveole Mousse Ø 150 mm.