- -12%
- Pack

Mini Lustrage Kit 3M Perfect-It - 50417-50487 / 80349-50488 / 50383-50388 - 3 x 250 ml
Mini Kit de Lustrage 3M Perfect-It
50417 - 50487 / 80349 - 50488 / 50383 - 50388
3 x 250 ml - 3 3M pads
Mini Kit de Lustrage 3M Perfect-It
50417 - 50487 / 80349 - 50488 / 50383 - 50388
3 x 250 ml - 3 3M pads
Mini 3M Perfect-It 3 x 250 ml 3-pads
3M 50417 250g and 3M 50487 foam in 150mm diam.
The Green Cut Fast Cut liquid quickly removes sanding scratches, while providing a high level of shine. With easy wiping, it is suitable for any type of paint.
Quickly removes sanding scratches
Brings a high level of brilliance
Easy wiping
Is suitable for all types of paintings
This polishing liquid is to be applied with green polishing foam - 150 mm
The Perfect-it IIITM colour-coded range consists of 3 finishing liquids and foams specific to the associated color. First of all, use the Fast Cut Plus Polishing Liquid, with a green cap (ref. 50417), with green polishing foam (diameter 150 mm; ref. 50487).
Thanks to its new formulation, it quickly and efficiently eliminates sanding scratches and gives the body an already very satisfying level of shine.
For an impeccable result, two products complete the work. The Extra Fin Lustrage Liquid (ref. 80349), equipped with a yellow cap, which is used with yellow honeycomb foam (diameter 150 mm; ref. 50488), completes the polishing and perfects the shine of the body. Then, the anti-hologram/hyper finish liquid (ref. 50383), with a blue cap, to be applied with blue honeycomb foam (diameter 150 mm; ref. 50388), removes any holograms and ensures an even deeper shine on the most delicate shades, such as dark blue or black.
An easy-to-memorize method for a flawless result. A color, an operation... The ease of spotting and memorizing offered by the cork/foam color codes makes the job easier. Indeed, each of the caps of the three products has a specific color (green, yellow, blue) that refers to a particular operation, respectively: polishing, glossing, removal of holograms.
3M 80349 250 ml and a foam 3M 50488 150 mm diam.
The 80349 extra fine polishing liquid has been developed specifically for the new anti-scratch varnishes, to give both a great cutting power and an ultra-brilliant finish.
This product can also be used on standard varnishes.
Used after the Trizact 50077 Polish Liquid, it quickly restores an exceptional shine that lasts over time.
It is recommended to use the 80349 with an electric or pneumatic chandelier, set to an average speed, equipped with a perfect-it 60107 honeycomb orange foam. The use of a very high-off orbital machine is an option that avoids possible holograms on very sensitive shades.
Key features
⇒ Great Cutting Power
⇒ Easy Wiping
⇒ Extra-fine finish and exceptional brilliance
⇒ Few projections
⇒ Packaged in 250 ml cans with new yellow anti-blocking cap for easy recognition
⇒ Ideal to complete a polishing operation with Trizact 3M 50077 polishing liquid
Application method
1. Shake the can of liquid to be polished before use.
2. Apply a small amount of extrafine polishing liquid to the foam 3M 50488 or directly on the surface. On larger areas, apply enough product to cover a 50cm x50cm square.
3. Spread the product evenly with the foam before starting the machine to avoid splashing
4. Start the machine (medium speed) and maintain a light pressure, avoiding staying in the same place so as not to cause the varnish to warm up.
5. Polish until the liquid begins to dry, then reduce the pressure applied to the machine by slightly increasing the speed of rotation.
6. Clean the worked surface with microfiber fabric.
7. Repeat on the rest of the panel in the polishing area.
8. At the end of the process, the surface can be protected with the ultimate protective liquid - red cap - Perfect-it 09377.
9. Clean the foam with water and allow to dry for later reuse
3M 50383 250 ml and a foam 3M 50388 150 mm diam.
Ultrafin Perfect-It-III Ultrafina SE Liquid
The Perfect-it IIITM Ultrafina SE 50383 liquid is an ultra-thin finishing product designed to eliminate holograms and haloes that may eventually be present after the luster operations.
Eliminates holograms and haloes without the need for an orbital machine
Apply with a blue honeycomb foam and a rotating chandelier
Brings optimal shine to the most delicate shades
Easy wiping
This lustrous liquid is to be applied with the Blue Honeycomb Moss - 150 mm.
Yannick S. published the 04/05/2022 following an order made on 14/04/2022
Très bon produits
Thierry F. published the 02/03/2021 following an order made on 21/02/2021
Facile d'utilisation
Christian C. published the 16/02/2021 following an order made on 05/02/2021
Commande arrivée dans les temps .le produit est à la hauteur de mes attentes .rendu parfait voire plus sur une vieille carrosserie de 40 ans .
Michel R. published the 22/01/2021 following an order made on 12/01/2021
Très bien !
kevin Thierry M. published the 24/12/2020 following an order made on 15/12/2020
pas encore essayer cadeau de noel
Dominique F. published the 08/12/2020 following an order made on 25/11/2020
inpossible de noté a se jour toujours pas de produit
Anonymous customer published the 24/11/2020 following an order made on 15/11/2020
Produits très efficaces
Anonymous customer published the 11/08/2020 following an order made on 02/08/2020
Que dire de plus! 3M c’est magique !
Anonymous customer published the 23/07/2020 following an order made on 13/07/2020
La mousse verte est marquée en profondeur et n est plus plane suite au contact des bidons de polish rangés dans le carton Est elle utilisable ( j ai une photo de la mousse abîmée à l ouverture du colis)
Anonymous customer published the 17/07/2020 following an order made on 09/07/2020
Très pratique je connais les produits je travail avec depuis des années au top 👌