MENZERNA One-Step Polish 3in1 - 250 ML - Polish + Finish + Sealing

Recommended use
1. Clean the surface carefully before polishing.
2. Shake the bottle before use and apply a small amount of product to the polishing pad (a drop the size of a pea is sufficient for an area of about 40 x 40 cm).
3. Use the Menzerna Medium Cut foam pad to remove scratches, sanding marks on the fresh coating and traces of use or washing. If you use a new or dry tampon, apply enough polish to prevent the formation of holograms.
4. Use a rotary or orbital polisher and use the cross-coating method.
Apply light pressure at the beginning of the polishing process. Eliminate the pressure in the last few cycles and
increase the speed of the polisher by 10%.
5. At first, the varnish will look a bit greasy and should be worked until only a slightly transparent/oily film
is visible.
6. Once you've finished polishing, remove any residue with our Premium microfiber cloth, without applying any pressure.
7. Scratches and traces of use/washing have now been removed.

Whatever the requirements of the surface: reapply Menzerna 3in1 with the Soft Cut foam pad or our foam wax pad for a glossy finish.