Gtechniq G1 ClearVision Smart Glass 100 ml

Why Use Gtechniq G1 ClearVision?

Unlike regular rain protections that adhere to the surface of the glass through relatively weak physical bonds, G1 uses chemical bonds to give it unrivalled durability.

G1 ClearVision Smart Glass is very durable and its hydrophobic function improves visibility in wet weather, helping to improve safety and reduce eye strain.
It also helps remove contaminants from glass, such as ice, insects and sap.
G1 is only suitable for glass substrates, so it is not suitable for modern polycarbonate headlight lenses.
For these, you will need to use a G5 water repellent for glass and Plexiglas.
Choose a 15 ml bottle for the windshield only, if you want to use it on all the car windows, please choose a 100 ml bottle.
G1 comes with a G2 residue remover.


Simple Steps To Help You Get The Best Results.

• Be sure to work in a well-ventilated area at 5 degrees C or more.
• Wear gloves and do not use under direct sunlight.
• Use the perfect G6 glass and the MF5 electric glass cloth to clean all the glass to protect.
• For best results, please use the G4 nano-glass polishing agent and a medium polishing pad to mechanically polish the glass. Or, polish the glass by hand with nano G4 glass polishing and a polishing pad. Apply a small amount and make a circular motion.
• Once finished, clean the glass with the G6 Perfect Glass and the MF5 or MF1 ZeroR microfiber cloth to make it shiny - repeat this several times to remove any residue.
• Shake the bottle well before use
• For the windshield, we recommend using 3 layers of G1 coating, but for the side and rear windshield, only one layer is required.
• Apply a large amount to the G1 applicator pad.
• Work the product in a circular motion, cover all the glass and let it harden for 5 minutes.
• Using a new applicator, apply the same amount of product to the pad, but this time, place G1 on your previous layer in a lateral motion, allow another 5 minutes to harden.
• Apply your third layer with the same amount of product on an applicator, but this time apply in straight vertical lines, let it dry for 15 minutes.
• Remove hardened residue with G2 residue remover. Dab the G2 on the remaining applicator and apply to a small area at a time, then immediately polish the glass with an MF1 cloth.
• Finish by cleaning the wiper brushes and glass with G6 Perfect Glass and an MF5.
• We recommend applying a layer of G1 to your wiper brushes without removing residue. If the wiper blades are worn out, they must be replaced.
• Do not expose your car to the environment for at least 3 hours.
• Keep in a cool, dry place.
• Use G1 and G2 within 3 months of opening.
• Windshield wiper brushes can make noise and in 90% it will disappear within two weeks. If this problem persists, refer to the "Fair Questions" section.